Total Flexibility For Your Desktop
Fulla 2 is a complete DAC/Amp in a single tiny case. Plug Fulla 2 into virtually any USB port, connect your headphones and/or powered monitors, and you’re set for great music. But that’s only the start.
Use it as an amp. Connect your phone (or any other analog source) to the convenient front jack.
Use it as a preamp. Connect to powered monitors or speaker amps using the variable outputs on the back.
Use it as a DAC. Connect to an external preamp or processor with the fixed 2V line outs on the back, or use the variable outputs for convenient volume control as well.
Use it with phones, tablets, or computers with low-powered USB ports. We’ve included a second USB port for power input. Plug in your phone charger (or any other 5V DC source with micro-USB output) and Fulla 2 tells your source it doesn’t need any power.
Like DACs costing more than 10X this price, Fulla uses the latest AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, as well as precision thin-film resistors and film capacitors, Fulla delivers performance far beyond its modest price.
Plenty of Headphone Power
Fulla 2 delivers a super punch, up to 550mW into 16 ohms, together with a vanishingly low noise floor and low output impedance. Or, in English, this means it’s a great match for virtually any headphone.
Technical specifications of Schiit Fulla 2
Operating frequency range : 20 Hz – 20 kHz (0.1 dB, 2 Hz – 200 kHz, -3 dB)
Maximum power with load impedance :
- 16 Ω: 550 mW RMS/ channel
- 32 ohm: 360mW RMS/ channel
- 50 Ω: 230 mW RMS/ channel
- 300 ohms: 40mW RMS/ channel
Harmonic coefficient : is less than 0.003% (20 Hz – 20 kHz, 1 V RMS)
Intermodulation Distortion : less than 0.002% (CCIF)
Signal to noise ratio : more than 105 dBA (1 V RMS)
Interaction : is less than -75 dB (20 Hz – 20 kHz)
Amp impedance : less than 0.5 Ohm
Formats : from 16 bits / 44.1 kHz to 24 bit / 96 kHz
USB Receiver : C-Media CM6631A, in UAC1 mode, without drivers
Output stage : TI LMH6643x2 (one per channel)
DAC : AKM AK4490; Filter on TI OPA1662
Power Source : USB or external 5 V adapter
Power consumption : ≈0.8 W
Dimensions : 89 × 63.5 × 35 mm
Mass : 0.26 kg